Standard Fog Kit

example SFC.JPG
example SFC.JPG

Standard Fog Kit

1,000.00

All the parts you need to assemble (you will need a hammer, 13 mm wrench, and needle nose plier, which are not included).  Does not include rain gauge.

Cost of $1000 includes $600 cost of fog collector plus an estimated $400 shipping costs. Shipping costs will be adjusted once they are determined.

Add To Cart

The standard passive fog collector with the Chilean Raschel mesh follows the design specifications described in Schemenauer and Cereceda (1996).   A double layer of 35% shade coefficient Coresa Raschel mesh is mounted within a 1.00 square meter copper structure.   It is supported at a base height of 2.0 meters by two stands and appropriate spacers.  A slanted trough mounted beneath the mesh collects water that drips down the mesh.  For installations on the ground, 4 guy wires and stakes (included) must be used to provide support.  It is fixed and must be oriented in a direction perpendicular to the wind direction expected during fog events.

The fog collector itself costs $600. Shipping costs listed are estimates. They will be adjusted once confirmed.